View BT169B_188907.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BT169 series
Thyristors logic level
Rev. 04 -- 23 August 2004 Product data sheet
1. Product profile
1.1 General description
Passivated, sensitive gate thyristors in a SOT54 plastic package.
1.2 Features
s Designed to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits.
1.3 Applications
s General purpose switching and phase control applications.
1.4 Quick reference data
s VDRM, VRRM 200 V (BT169B) s VDRM, VRRM 400 V (BT169D) s VDRM, VRRM 600 V (BT169G) s IT(RMS) 0.8 A s IT(AV) 0.5 A s ITSM 8 A.
2. Pinning information
Table 1: Pin 1 2 3 Discrete pinning Description anode (a) gate (g) cathode (k)
sym037
Simplified outline
Symbol
321
SOT54 (TO-92)
Philips Semiconductors
BT169 series
Thyristors logic level
3. Ordering information
Table 2: Ordering information Package Name BT169B BT169D BT169G Description plastic single-ended leaded (through hole) package; 3 leads Version SOT54 Type number
4. Limiting values
Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VDRM, VRRM Parameter repetitive peak off-state voltages BT169B BT169D BT169G IT(AV) average on-state current half sine wave; Tlead 83 C; see Figure 1 all conduction angles; see Figure 4 and 5 half sine wave; Tj = 25 C prior to surge; see Figure 2 and 3 t = 10 ms t = 8.3 ms I2t dIT/dt IGM VGM VRGM PGM PG(AV) Tstg Tj
[1]
[1] [1] [1]
Conditions
Min -
Max 200 400 600 0.5
Unit V V V A
IT(RMS) ITSM
RMS on-state current non-repetitive peak on-state current
-
0.8
A
-
8 9 0.32 50 1 5 5 2 0.1 +150 125
A A A2s A/s A V V W W C C
I2t
for fusing
t = 10 ms ITM = 2 A; IG = 10 mA; dIG/dt = 100 mA/s
repetitive rate of rise of on-state current after triggering peak gate current peak gate voltage peak reverse gate voltage peak gate power average gate power storage temperature junction temperature
over any 20 ms period
-40 -
Although not recommended, off-state voltages up to 800 V may be applied without damage, but the thyristor may switch to the on-state. The rate of rise of current should not exceed 15 A/s.
9397 750 13512
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 04 -- 23 August 2004
2 of 12
Philips Semiconductors
BT169 series
Thyristors logic level
0.8 Ptot (W) 0.6 2.2 2.8 0.4 4 a= 1.57 1.9
001aab446
77 Tc(max) (C) 89
101 conduction angle (degrees) 30 60 90 120 180 form factor a 4 2.8 2.2 1.9 1.57 0.5 IT(AV) (A) 113
0.2
0 0 0.1 0.2 0.3 0.4
125 0.6
a = form factor = IT(RMS)/IT(AV).
Fig 1. Total power dissipation as a function of average on-state current; maximum values.
10 ITSM (A) 8
t tp Tj initial = 25 C max IT
001aab499
ITSM
6
4
2
0 1 10
102 n
103
f = 50 Hz.
Fig 2. Non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum values.
9397 750 13512
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 04 -- 23 August 2004
3 of 12
Philips Semiconductors
BT169 series
Thyristors logic level
103 ITSM (A) 102
IT
001aab497
ITSM
t tp Tj initial = 25 C max
10
1 10-5
10-4
10-3 tp (s)
10-2
tp 10 ms.
Fig 3. Non-repetitive peak on-state current as a function of pulse width for sinusoidal currents; maximum values.
001aab449
2 IT(RMS) (A) 1.5
1 IT(RMS) (A) 0.8
001aab450
(1)
0.6 1 0.4
0.5 0.2
0 10-2
10-1
1 10 surge duration (s)
0 -50
0
50
100 150 Tlead (C)
f = 50 Hz; Tlead 83 C.
(1) Tlead = 83 C.
Fig 4. RMS on-state current as a function of surge duration for sinusoidal currents.
Fig 5. RMS on-state current as a function of lead temperature; maximum values.
9397 750 13512
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 04 -- 23 August 2004
4 of 12
Philips Semiconductors
BT169 series
Thyristors logic level
5. Thermal characteristics
Table 4: Symbol Rth(j-lead) Rth(j-a) Thermal characteristics Parameter thermal resistance from junction to lead thermal resistance from junction to printed-circuit board ambient mounted; lead length = 4 mm Conditions Min Typ 150 Max 60 Unit K/W K/W
102 Zth(j-lead) (K/W) 10
001aab451
1
P = tp T
10-1
tp T t
10-2 10-5
10-4
10-3
10-2
10-1
1 tp (s)
10
Fig 6. Transient thermal impedance as a function of pulse width.
9397 750 13512
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 04 -- 23 August 2004
5 of 12
Philips Semiconductors
BT169 series
Thyristors logic level
6. Characteristics
Table 5: Characteristics Tj = 25 C unless otherwise stated. Symbol IGT IL IH VT VGT Parameter gate trigger current latching current holding current on-state voltage gate trigger voltage Conditions VD = 12 V; IT = 10 mA; gate open circuit; see Figure 8 VD = 12 V; IGT = 0.5 mA; RGK = 1 k; see Figure 10 VD = 12 V; IGT = 0.5 mA; RGK = 1 k; see Figure 11 IT = 1.2 A IT = 10 mA; gate open circuit; see Figure 7 VD = 12 V VD = VDRM(max); Tj = 125 C ID, IR off-state leakage current critical rate of rise of off-state voltage VD = VDRM(max); VR = VRRM(max); Tj = 125 C; RGK = 1 k VDM = 67 % VDRM(max); Tj = 125 C; exponential waveform; see Figure 12 RGK = 1 k gate open circuit tgt tq gate controlled turn-on time circuit commuted turn-off time ITM = 2 A; VD = VDRM(max); IG = 10 mA; dIG/dt = 0.1 A/s VD = 67 % VDRM(max); Tj = 125 C; ITM = 1.6 A; VR = 35 V; dITM/dt = 30 A/s; dVD/dt = 2 V/s; RGK = 1 k 500 800 25 2 100 V/s V/s s s 0.2 0.5 0.3 0.05 0.8 0.1 V V mA Min Typ 50 2 2 1.25 Max 200 6 5 1.7 Unit A mA mA V Static characteristics
Dynamic characteristics dVD/dt
9397 750 13512
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 04 -- 23 August 2004
6 of 12
Philips Semiconductors
BT169 series
Thyristors logic level
1.6 VGT(Tj) VGT(25 C) 1.2
001aab501
3 IGT(Tj) IGT(25 C) 2
001aab502
0.8
1
0.4 -50
0
50
100 Tj (C)
150
0 -50
0
50
100 Tj (C)
150
Fig 7. Normalized gate trigger voltage as a function of junction temperature.
001aab454
Fig 8. Normalized gate trigger current as a function junction temperature.
3 IL(Tj) IL(25 C) 2
001aab503
5 IT (A) 4
3
2 1 1
(1) (2) (3)
0 0.4
1.2
2 VT (V)
2.8
0 -50
0
50
100 Tj (C)
150
VO = 1.067 V. RS = 0.187 . (1) Tj = 125 C; typical values. (2) Tj = 125 C; maximum values. (3) Tj = 25 C; maximum values.
RGK = 1 k.
Fig 9. On-state current characteristics.
Fig 10. Normalized latching current as a function of junction temperature.
9397 750 13512
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 04 -- 23 August 2004
7 of 12
Philips Semiconductors
BT169 series
Thyristors logic level
3 IH(Tj) IH(25 C) 2
001aab504
104 dVD/dt (V/s)
(1)
001aab507
103
1
102
(2)
0 -50
10 0 50 100 Tj (C) 150 0 50 100 Tj (C) 150
RGK = 1 k.
(1) RGK = 1 k. (2) Gate open circuit.
Fig 11. Normalized holding current as a function of junction temperature.
Fig 12. Critical rate of rise of off-state voltage as a function of junction temperature; typical values.
7. Package information
Epoxy meets requirements of UL94 V-0 at 18 inch.
9397 750 13512
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 04 -- 23 August 2004
8 of 12
Philips Semiconductors
BT169 series
Thyristors logic level
8. Package outline
Plastic single-ended leaded (through hole) package; 3 leads SOT54
c
E d A L b
1
D
2
e1 e
3
b1
L1
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 5.2 5.0 b 0.48 0.40 b1 0.66 0.55 c 0.45 0.38 D 4.8 4.4 d 1.7 1.4 E 4.2 3.6 e 2.54 e1 1.27 L 14.5 12.7 L1(1)
max.
2.5
Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION SOT54 REFERENCES IEC JEDEC TO-92 JEITA SC-43A EUROPEAN PROJECTION ISSUE DATE 97-02-28 04-06-28
Fig 13. Package outline.
9397 750 13512 (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 04 -- 23 August 2004
9 of 12
Philips Semiconductors
BT169 series
Thyristors logic level
9. Revision history
Table 6: Revision history Release date 20040823 Data sheet status Product data sheet Change notice Order number 9397 750 13512 Supersedes BT169_SERIES_3 Document ID BT169_SERIES_4 Modifications:
* * * *
The format of this data sheet has been redesigned to comply with the new presentation and information standard of Philips Semiconductors. Section 1.4 "Quick reference data": BT169E obsolete, removed from list. Table 2 "Ordering information": BT169E obsolete, removed from table. Table 3 "Limiting values": BT169E obsolete, removed from table. Product specification Product specification Product specification not applicable not applicable not applicable BT169_SERIES_2 BT169_SERIES_1 -
BT169_SERIES_3 BT169_SERIES_2 BT169_SERIES_1
20010902 20010901 19970901
9397 750 13512
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 04 -- 23 August 2004
10 of 12
Philips Semiconductors
BT169 series
Thyristors logic level
10. Data sheet status
Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).
III
Product data
Production
[1] [2] [3]
Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
11. Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
12. Disclaimers
Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
13. Contact information
For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
9397 750 13512
(c) Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 04 -- 23 August 2004
11 of 12
Philips Semiconductors
BT169 series
Thyristors logic level
14. Contents
1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 5 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package information . . . . . . . . . . . . . . . . . . . . . 8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information . . . . . . . . . . . . . . . . . . . . 11
(c) Koninklijke Philips Electronics N.V. 2004
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 23 August 2004 Document order number: 9397 750 13512
Published in The Netherlands

▲Up To Search▲

Price & Availability of BT169B

	To Download BT169B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .